Stonetech
STONETECH® Oil Stain Remover
STONETECH® Oil Stain Remover
Pint
DDT Livonia, Warehouse
31575 Glendale St
Livonia MI 48150
United States
Choose options
STONETECH® Professional Oil Stain Remover
- Oil From Concrete
- Tile
- Natural Stone
- Grout
STONETECH® Oil Stain Remover is designed to remove oil-based stains without discoloring the surface.
Where to Use
Natural stone such as marble, granite, limestone, travertine, slate & sandstone. Grout for ceramic and porcelain tile. Masonry and concrete.
Directions For Removing Oil Stains
Read the entire label before using. Use only as directed. Always test in a small inconspicuous area to confirm that you will achieve the desired results. Make sure the surface is clean, dry, and free of waxes and coatings. Make sure the area is well-ventilated, and keep children and pets away during application and until the surface dries completely.
1. Using a plastic or wood spatula, stir thoroughly to mix the paste.
2. Apply a 1/4-in thick layer of paste to the stain. Ensure that the paste extends at least 1-2 in beyond the edge of the stain.
3. Do not cover.
4. Allow 48-72 hours for the paste to completely dry to a powder.
5. Remove powder and discard.
6. Allow the solvent to completely dry on the stone.
7. If the stain remains after drying, repeat the process.
8. Clean up residue and tools with mineral spirits.
9. Reseal the cleaned area.
Available Sizes and Coverage
- 3 oz Can: 14-28 sq in of surface at 1/4-in thickness
- Pint Can: 1/2-1 sq ft of surface at 1/4-in thickness
You may also like
Customer Reviews
WHAT OTHERS SAY ABOUT US
